How to Graph a Function on the TI-84

Graphing a function is the single most useful thing your TI-84 can do, and it is the skill almost every other guide on this site builds on. If you can enter a function, graph it, and read values off the graph, you can check your homework, understand what a function is really doing, and spot mistakes before your teacher does. This guide takes you through the whole process slowly, from typing the function in to fixing the graph when it does not look right.

What you need before you start

You need a function to graph, and you need to know what it looks like in maths notation. A function is a rule that turns an x value into a y value, like y = 2x + 1, or y = x squared minus 3. On the TI-84 you will type it into the Y= editor, and the calculator will draw it for you. It helps to have a rough idea of what the graph should look like before you start, because then you will know if the calculator is showing you something sensible. A line should look like a line, and a parabola should look like a U shape. If it does not, something is wrong with the window or the function, not with the calculator.

Step 1: enter the function in Y=

Press [Y=]. You will see a list of function slots: Y1, Y2, Y3 and so on. Move to Y1 with the arrow keys if you are not already there. Now type your function. For y = 2x + 1, press 2, then the [X,T,θ,n] key for x, then + then 1. For y = x^2 – 3, press [X,T,θ,n], then the [x^2] key, then – then 3.

Make sure the equals sign in front of Y1 is highlighted. If it is not, move the cursor onto it with the left arrow and press [ENTER] to turn it on. A function with the equals sign turned off will not graph, and the calculator will not tell you why. It will just draw nothing, which is very confusing the first time it happens.

Step 2: press GRAPH

Press [GRAPH]. The calculator will draw your function on the screen. For y = 2x + 1 you should see a straight line going up from left to right, crossing the y-axis at 1. For y = x^2 – 3 you should see a parabola opening upwards, with its lowest point at (0, -3). Take a moment to look at the graph and ask yourself if it matches what you expected. If you were graphing a line and you see a curve, or the other way round, go back to Y= and check what you typed.

If the screen is blank, do not panic. The most likely reason is the window. The calculator is drawing the graph, but in a part of the grid you cannot see. Press [ZOOM] and choose 6: ZStandard. That resets the window to x from -10 to 10 and y from -10 to 10, which is the standard view for most school problems. Press [GRAPH] again and the graph should appear.

Step 3: fix the window if you need to

The window is the part of the coordinate grid the calculator shows you, and learning to control it is half of graphing. Press [WINDOW] and you will see the settings: Xmin, Xmax, Xscl, Ymin, Ymax, Yscl and Xres. Xmin and Xmax are the left and right edges of the screen, and Ymin and Ymax are the bottom and top. Xscl and Yscl control how far apart the tick marks are on the axes.

For most problems, ZStandard is enough. But sometimes you need a different view. If you are graphing y = x^2 and you want to see the vertex clearly, you might set Xmin to -5, Xmax to 5, Ymin to -5 and Ymax to 10, so the parabola fills the screen nicely. If you are graphing a line with a steep slope, you might need a bigger y range. Use the arrow keys to move between the window settings, type the new number, and press [ENTER]. Then press [GRAPH] to see the result. Do not be afraid to experiment with the window; you cannot break anything, and ZStandard will always get you back to a sensible view.

Step 4: read values off the graph with TRACE

Press [TRACE] and a cursor will appear on the graph. Use the left and right arrow keys to move along the curve, and the screen will show the x and y values of the point you are on. This is how you answer questions like what is y when x is 3, or where does the graph cross the x-axis. Move the cursor until the x value on the screen is close to the value you want, and read off the y value.

If you have more than one function graphed, press the up or down arrow while you are tracing to jump to the next function. The function you are tracing is shown at the top of the screen, so you always know which one you are on. TRACE is not perfectly precise, because the cursor moves in steps, but it is good enough for checking your work and for getting a feel for the shape of a function.

Graphing more than one function

You can graph several functions at once, which is useful when you want to compare them or find where they cross. Press [Y=] and type a second function into Y2. For example, put y = 2x + 1 in Y1 and y = x^2 – 3 in Y2. Press [GRAPH] and both will appear on the same screen. The calculator draws them in the same colour on the TI-84 Plus CE, but you can tell them apart by tracing and watching which function is shown at the top of the screen.

If the two graphs look tangled, use [ZOOM] and choose 6: ZStandard to tidy the view, or change the window so both graphs fit nicely. Graphing two functions together is the starting point for finding intersections, which we cover in a separate guide, so it is worth getting comfortable with it now.

Common graphing mistakes

The most common mistake is a typing error in Y=. A missing bracket, a minus sign where a negative sign should be, or an x typed as a letter instead of the [X,T,θ,n] key will all give you a strange graph or an error message. If the graph looks wrong, go back to Y= and read what you typed, character by character. The second most common mistake is the window, which we have already covered. The third is having the equals sign turned off for the function you want to graph. The fourth is being in the wrong mode, such as Polar or Parametric instead of Function mode. Check [MODE] and make sure Func is selected on the fourth line if your graphs are not behaving.

Another mistake is forgetting that the calculator graphs what you typed, not what you meant. If you meant y = (x + 2)^2 and you typed y = x + 2^2, the calculator will draw a line, not a parabola, because it followed the order of operations. Brackets matter, and it is worth typing them carefully.

Try it yourself

Give yourself ten minutes with these three functions. Graph y = 3x – 2 and check that it crosses the y-axis at -2. Graph y = x^2 + 2x + 1 and find its lowest point with TRACE. Graph y = -x + 4 and y = x – 2 together, and see where they cross. If you can do all three without looking back at this guide, you have the core graphing skill that every other guide on this site uses. From here, finding vertices, intercepts and intersections is just a few more key presses.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top