Decimals and fractions are two ways of writing the same number, and your teacher will ask you to switch between them all the time. A decimal like 0.75 is the same as the fraction 3/4, and the fraction 1/3 is the same as the decimal 0.3333, going on forever. Your TI-84 can convert in both directions in seconds, and it can do it exactly, which is the important part. This guide shows you how, and explains when to use each form.
Why the exact form matters
Some decimals are exact, like 0.5, which is 1/2, and some are rounded, like 0.3333, which is close to 1/3 but not exactly equal. When your teacher asks for an exact answer, they want the fraction, not a rounded decimal. When a problem gives you a decimal and asks for a fraction, it is testing whether you can find the exact form. The calculator’s fraction tool gives you the exact fraction, as long as the decimal is one that has an exact fraction form, like a terminating decimal or a simple repeating one. That is why converting is worth learning.
Decimals to fractions with the MATH menu
Type the decimal into the calculator and press [ENTER] to see it on the screen. Then press [MATH] and choose 1: >Frac. The calculator will show you the fraction. For 0.75, press [MATH], choose 1: >Frac, and press [ENTER] to get 3/4. For 0.2, you should get 1/5. For 0.125, you should get 1/8. The calculator simplifies the fraction for you, which is one of the best things about it.
You can also use the fraction template to type a decimal and convert it in one step. Press [MATH] and choose 1: >Frac after any calculation, and the calculator will convert the answer to a fraction if it can. If the decimal does not have a simple fraction form, like 0.123456789, the calculator will give you a fraction with a large denominator, or it will leave it as a decimal. That tells you the decimal is not a simple fraction, and you should leave it as a decimal.
Fractions to decimals with the MATH menu
To go the other way, type the fraction into the calculator using the fraction key, press [ENTER] to see it as a fraction, then press [MATH] and choose 2: >Dec. The calculator will show you the decimal. For 3/4, press [MATH], choose 2: >Dec, and press [ENTER] to get 0.75. For 1/3, you should get 0.3333333333, which is the decimal going on forever, rounded to fit on the screen. For 2/7, you should get 0.2857142857.
That rounded decimal is an approximation, not the exact answer. If your teacher wants an exact answer, keep the fraction. If they want a decimal, the calculator’s answer is usually fine, but check how many decimal places they want. If they want two decimal places, round the calculator’s answer to two decimal places. If they want three, round to three. The calculator gives you plenty of digits, and you choose how many to use.
Repeating decimals
A repeating decimal, like 0.3333 or 0.1666, is a decimal where the same digits repeat forever. The fraction for 0.3333 is 1/3, and the fraction for 0.1666 is 1/6. To find the fraction for a repeating decimal, type the decimal into the calculator, press [MATH], and choose 1: >Frac. The calculator will give you the fraction, as long as you typed enough digits for it to recognise the pattern. For 0.3333333333, it should give you 1/3. For 0.1666666667, it should give you 1/6, though the last digit being 7 instead of 6 might confuse it, so type 0.1666666666 instead.
Not every repeating decimal has a simple fraction, but most of the ones in school do. If the calculator gives you a fraction with a large denominator, like 1666666667/10000000000, it has not recognised the pattern, and you should try typing more repeating digits, or work it out by hand. The hand method is to set x equal to the decimal, multiply by 10 or 100 to move the decimal point, and subtract. That is worth knowing, because it is the method your teacher will expect you to show.
Using fractions and decimals in calculations
You can mix fractions and decimals in the same calculation, and the calculator will handle it. If you type 1/2 + 0.25 and press [ENTER], the calculator will give you 0.75, or 3/4, depending on your settings. If you want the answer as a fraction, press [MATH] and choose 1: >Frac. If you want it as a decimal, press [MATH] and choose 2: >Dec. You can switch back and forth as many times as you like, which is handy when a problem gives you a mix of fractions and decimals and asks for the answer in one form or the other.
A good habit is to work in fractions when the numbers are fractions, and in decimals when the numbers are decimals, and to convert only at the end. That way you keep the exact form for as long as possible, and you only round at the last step. If you convert to decimals early, you might round too soon and get a slightly wrong answer at the end.
Common mistakes
The most common mistake is trusting a rounded decimal as if it were exact. 0.3333 is not 1/3, it is close to 1/3, and in a calculation where you multiply by a large number, that small difference can grow. Use the fraction form when you need an exact answer, and use the decimal form when an approximation is enough. The second most common mistake is forgetting to press [MATH] and choose 1: >Frac after typing a decimal, and then wondering why the calculator did not convert it. The calculator does not convert on its own. You have to tell it to.
Another mistake is typing a repeating decimal with too few digits, so the calculator cannot recognise the pattern. If you type 0.33 and ask for the fraction, you will get 33/100, not 1/3, because 0.33 is not the same as 0.3333 going on forever. Type enough digits for the pattern to be clear, at least eight or nine of them. A fourth mistake is rounding a decimal before you convert it. If you round 2/3 to 0.67 and then convert 0.67 to a fraction, you will get 67/100, not 2/3. Convert the exact value, not the rounded one.
Try it yourself
Try these on your calculator. Convert 0.6 to a fraction, which should give you 3/5. Convert 0.875 to a fraction, which should give you 7/8. Convert 5/8 to a decimal, which should give you 0.625. Convert 0.8333333333 to a fraction, which should give you 5/6. If you can do all four, including the repeating decimal one, you have the conversion skill down, and you can switch between decimals and fractions whenever a problem asks you to, without losing the exact answer.