Quadratic equations show up in almost every algebra class, and they can be slow to solve by hand. Factoring works when the numbers are friendly, the quadratic formula works when they are not, and completing the square works when your teacher asks for it. Your TI-84 can solve quadratics in several different ways, and this guide shows you the three most useful ones: the solver, the graph, and the quadratic formula program. Learn one of them well and you will have a fast way to check every quadratic you meet.
What a quadratic equation is
A quadratic equation is an equation where the highest power of x is 2, like x^2 – 5x + 6 = 0, or 2x^2 + 3x – 2 = 0. It usually has two solutions, which are the x values that make the equation true. For x^2 – 5x + 6 = 0, the solutions are x = 2 and x = 3, because (2)^2 – 5(2) + 6 = 0 and (3)^2 – 5(3) + 6 = 0. Those solutions are also the x-intercepts of the graph of y = x^2 – 5x + 6, which is a useful connection to remember. When you solve a quadratic, you are finding where its graph crosses the x-axis.
Some quadratics have one solution, and some have no real solutions at all. If the graph never touches the x-axis, there are no real solutions, and the calculator will tell you that, or give you an error, depending on which method you use. That is useful information, not a failure.
Method 1: solve it with the graph and the zero tool
Press [Y=] and type the left side of your equation into Y1. For x^2 – 5x + 6 = 0, type x^2 – 5x + 6. Use the [X,T,θ,n] key for x and the [x^2] key for the squared term. Make sure the equals sign next to Y1 is highlighted, then press [GRAPH]. You should see a parabola crossing the x-axis in two places.
Now find each crossing with the zero tool. Press [2ND] then [TRACE] and choose 2: zero. Move the cursor to a point to the left of the first crossing, press [ENTER], move it to a point to the right of that crossing, press [ENTER], move it close to the crossing, and press [ENTER] again. The calculator will show you the zero, which is one solution. For our example, the first zero should be X=2. Do the same thing on the other side of the graph to find the second zero, X=3. Those are your two solutions.
This method is great because you can see what is happening. If the parabola crosses the x-axis twice, there are two solutions. If it just touches the x-axis, there is one solution. If it never touches, there are no real solutions, and the zero tool will not find anything, which tells you the answer is no real solutions.
Method 2: use the equation solver
The TI-84 has a built-in equation solver that can solve a quadratic for you. Press [MATH] and choose 0: Solver. You will see a screen that says eqn:0=. Type your equation here, using [X,T,θ,n] for x. For x^2 – 5x + 6 = 0, type x^2 – 5x + 6 = 0. To get the equals sign, press [2ND] then [MATH] and choose 1: =, or press [ALPHA] then [MATH] on some models. Press [ENTER] and the solver will show you the equation with a value for x underneath.
Move the cursor down to the line that says x= and type a guess for the solution, like 0 or 1, then press [ALPHA] then [ENTER] to solve. The calculator will find a solution near your guess. For our example, if you guess 0, it should find x = 2. To find the other solution, go back to the solver, change your guess to 4 or 5, and solve again. It should find x = 3. The solver finds one solution at a time, near the guess you give it, so you need to guess in the right area for each solution.
The solver is useful when the equation is not already in the form something = 0, or when you want to solve for a different variable. It is a general tool, and it works for many kinds of equations, not just quadratics. It is worth learning, because it will help you in physics and chemistry as well as in maths.
Method 3: use the quadratic formula
The quadratic formula is x = (-b ± sqrt(b^2 – 4ac)) / 2a, and it gives you both solutions at once. You can type it into the calculator by hand, which is good practice, or you can use a program that does it for you. To type it by hand, press [MATH] and use the fraction template, the square root key [2ND] then [x^2], and the plus/minus. For x^2 – 5x + 6 = 0, a is 1, b is -5, and c is 6. Type (-(-5) + sqrt((-5)^2 – 4(1)(6))) / (2(1)) and press [ENTER] to get 3. Then change the + to a – and press [ENTER] again to get 2.
That is a lot of typing, and it is easy to make a mistake with the brackets. A cleaner way is to store a, b and c first. Type 1, press [STO>], press [ALPHA] then [A], and press [ENTER]. Do the same for b = -5 and c = 6. Then type the formula using A, B and C instead of the numbers. It is still long, but it is easier to read, and if you make a mistake, you can use the up arrow to bring the calculation back and fix it.
Some teachers let you use a quadratic formula program, and some do not, so check before a test. If you are allowed to use one, you can find free quadratic formula programs online, or write your own in the program editor. A program is faster, but typing the formula by hand is better for learning, because it forces you to understand what a, b and c are.
Checking your answers
Whichever method you use, check your answers by putting them back into the equation. For x = 2, x^2 – 5x + 6 = 4 – 10 + 6 = 0. For x = 3, it is 9 – 15 + 6 = 0. Both work, so both are right. If you put a solution back in and you do not get 0, it is not a solution, and you should try again. The calculator can help you check, too. Store your solution in X, then type the left side of the equation and press [ENTER]. If it gives you 0, your solution is right.
Another good check is to compare methods. Solve the quadratic with the graph, then solve it with the solver or the formula, and see if the answers agree. If they do, you can be confident. If they do not, one of the methods has a typing error, and you need to find it. The graph is usually the easiest one to check, because you can see the crossings.
Common mistakes
The most common mistake is typing the equation into Y= without making it equal to zero first. If your equation is x^2 – 5x = -6, you need to add 6 to both sides to get x^2 – 5x + 6 = 0 before you graph it. If you graph y = x^2 – 5x and look for where it equals -6, that is a different problem, and the zero tool will not give you the right answer. Always move everything to one side first.
Another mistake is forgetting the brackets in the quadratic formula, especially around 2a and around b^2 – 4ac. If you type -b + sqrt(b^2 – 4ac)/2a without brackets, the calculator will divide only the square root by 2a, not the whole top of the fraction. Use brackets generously. A third mistake is using the solver with a bad guess, so it finds the same solution twice or fails to find one at all. If the solver gives you the same answer twice, change your guess to the other side of the graph and try again.
Try it yourself
Try these on your calculator. Solve x^2 – 7x + 12 = 0, which should give you x = 3 and x = 4. Solve 2x^2 + 5x – 3 = 0, which should give you x = 0.5 and x = -3. Solve x^2 + 4x + 4 = 0, which should give you one solution, x = -2. If you can solve all three with the graph and check them with the quadratic formula, you have the quadratic skill down, and you can use it to check every quadratic problem in your homework.