How to Find the Intersection of Two Graphs on the TI-84

When two graphs cross, the point where they meet is often the answer to the whole problem. In a system of equations, the intersection is the solution. In a word problem, it might be the moment two things are equal, like when two phone plans cost the same, or when two objects are at the same height. Finding that point by hand means solving equations, which can be slow. On the TI-84, you can find it with the intersect tool in under a minute. This guide shows you how.

What an intersection is

An intersection is a point that lies on both graphs at the same time. If you graph y = 2x + 1 and y = -x + 4, they cross at (1, 3). That means when x is 1, both functions give y = 3. It is also the solution to the system of equations y = 2x + 1 and y = -x + 4, because x = 1 and y = 3 satisfy both equations at once. The calculator finds this point by looking at where the two curves meet, and it gives you the coordinates.

Not every pair of graphs intersects. Parallel lines never meet, and some curves miss each other entirely. If the calculator cannot find an intersection, it will tell you, and that is useful information too. It means the system has no solution, or the graphs do not cross in the window you are looking at.

Step 1: graph both functions

Press [Y=] and type the first function into Y1 and the second into Y2. For our example, type 2x + 1 into Y1 and -x + 4 into Y2. Use the [X,T,θ,n] key for x. Make sure the equals signs next to both Y1 and Y2 are highlighted, so both functions will graph. Press [GRAPH] and you should see two lines crossing each other.

If you only see one line, check that both equals signs are turned on. If you see nothing, press [ZOOM] and choose 6: ZStandard to reset the window, then press [GRAPH] again. Look at the graph and find the crossing point with your eyes first. In our example, the lines cross at about (1, 3). That rough guess will help you use the intersect tool.

Step 2: open the intersect tool

Press [2ND] then [TRACE] to open the CALC menu. Choose 5: intersect. The calculator will show the graph again with a cursor on the first function, and it will ask you to select the first curve. Press [ENTER] to select the curve the cursor is on, which should be Y1. Then it will ask you to select the second curve. Press the up or down arrow to move the cursor to the other function, and press [ENTER] to select it.

The calculator needs to know which two curves you are talking about, especially if you have more than two functions graphed. Watch the top of the screen, which shows which function the cursor is on. Make sure you select one of each function, not the same one twice. If you do select the same one twice, the calculator will not find an intersection, and you will need to start again.

Step 3: make a guess

After you have selected both curves, the calculator will ask you to guess. Move the cursor with the arrow keys until it is close to the point where the two graphs cross, and press [ENTER]. The calculator will think for a moment and then show you the intersection. For our example, it should show Intersection X=1 Y=3. That is the point (1, 3), where the two lines meet.

Your guess does not need to be exact. It just needs to be close enough that the calculator knows which crossing you mean, which matters when two graphs cross more than once. If the graphs cross in several places, make your guess near the crossing you want, and the calculator will find that one.

Check the answer

It is always worth checking an intersection by putting the x value back into both functions. For our example, x = 1 gives y = 2(1) + 1 = 3 for the first function, and y = -1 + 4 = 3 for the second. Both give 3, so the point (1, 3) is on both graphs, and the answer is right. If the two functions give different y values for the x the calculator found, something went wrong, and you should try again with a better guess or a better window.

You can also check with the table. Press [2ND] then [GRAPH] to open the table, and scroll down until you find the x value where Y1 and Y2 are equal. For our example, at x = 1, both Y1 and Y2 are 3. The table is a good backup when the intersect tool is being difficult.

Intersections of curves, not just lines

The intersect tool works for curves as well as lines, and that is where it really earns its keep. Try graphing y = x^2 and y = 2x in Y1 and Y2. They cross at (0, 0) and at (2, 4). Use the intersect tool twice, once with a guess near (0, 0) and once with a guess near (2, 4), and you will get both points. That is much faster than solving x^2 = 2x by hand, though it is worth knowing that the algebra gives the same answers.

Try another pair: y = x^2 – 3 and y = x + 1. They cross at two points, and the intersect tool will find each one if you guess near it. If you guess in the middle, the calculator might pick the wrong crossing, so be deliberate about where you put the cursor before you press [ENTER].

Common mistakes

The most common mistake is selecting the same curve twice. The calculator will show an error or refuse to find the intersection, because a curve does not intersect itself in a useful way. Watch the function shown at the top of the screen and make sure you select a different one for the second curve. The second most common mistake is guessing too far from the crossing, especially when the graphs cross more than once. Move the cursor close to the crossing you want before you press [ENTER].

Another mistake is having a window that does not show the intersection at all. If the graphs cross at x = 20 but your window only goes to x = 10, the calculator cannot find it. If you know roughly where the intersection should be, set the window to include it, or use [ZOOM] and choose 6: ZStandard to start from a sensible view. Finally, remember that the intersect tool gives you a decimal answer. If the true intersection is a fraction like 1/3, the calculator might show 0.3333. That is close enough for a graph, but if your teacher wants an exact answer, use the calculator’s answer as a check and solve the equations by hand for the exact form.

Try it yourself

Try these pairs on your calculator. Find the intersection of y = 3x – 2 and y = -x + 6, which should be (2, 4). Find the intersections of y = x^2 and y = x + 2, which should be (-1, 1) and (2, 4). Find the intersection of y = 2x + 5 and y = -3x + 5, which should be (0, 5). If you can find all of them, including both crossings when there are two, you can use the intersect tool for systems of equations, for word problems, and for checking your algebra, all from the same few key presses.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top