The table feature is one of the most underused tools on the TI-84, and that is a shame, because it turns a graph into a neat list of numbers in seconds. Instead of tracing along a curve and guessing at values, you can open the table and see the x and y values side by side, row by row. It is perfect for checking your work, for finding points on a function, and for answering questions about what happens as x gets bigger. This guide shows you how to set it up and how to use it well.
What the table does
The table takes the function you entered in Y= and lists its values. Each row shows an x value and the y value the function gives for that x. If your function is y = 2x + 1, the table will show x = 0, y = 1; x = 1, y = 3; x = 2, y = 5, and so on. It is the same information as the graph, but in numbers instead of a picture. Some students prefer the table, because numbers are easier to read exactly than a point on a curve.
The table is also a great way to check a graph. If the graph looks strange, the table will show you the actual values, and you can see whether the function is doing what you expected. If you are working on a word problem, the table can show you a pattern, like how a cost grows as you buy more items, or how a height changes over time.
Step 1: enter your function
Press [Y=] and type your function into Y1. For our example, type x^2 – 3. Use the [X,T,θ,n] key for x and the [x^2] key for the squared term. Make sure the equals sign next to Y1 is highlighted. You do not need to graph the function first, but it helps to know what it looks like. Press [GRAPH] if you want to see it, then come back to the table.
Step 2: open the table
Press [2ND] then [GRAPH]. That key combination opens the table, which is the second function of the GRAPH key, printed in blue above it. You should see a table with two columns: X on the left and Y1 on the right. The X column will show 0, 1, 2, 3, and so on, and the Y1 column will show the value of your function at each of those x values. For y = x^2 – 3, the table should show x = 0, y = -3; x = 1, y = -2; x = 2, y = 1; x = 3, y = 6.
Use the arrow keys to move around the table. Up and down move through the rows, and left and right move between the columns. If you have more than one function in Y=, the table will have a column for each one, so you can compare them side by side. That is very useful when you want to see where two functions give the same value, which is their intersection.
Step 3: set up the table the way you want it
By default, the table starts at x = 0 and goes up in steps of 1. That is fine for many problems, but sometimes you want different starting values or steps. Press [2ND] then [WINDOW] to open the table setup screen. You will see four settings: TblStart, the x value where the table starts; ΔTbl, the step size, or how much x increases from one row to the next; Indpnt, whether the x values are automatic or set by you; and Depend, whether the y values are automatic or set by you.
To change the starting value, move to TblStart, type the number you want, and press [ENTER]. To change the step, move to ΔTbl and type the step you want. For example, if you are working with a function that changes quickly, you might want a step of 0.5 instead of 1, so you can see more detail. If you are working with large numbers, you might want a step of 10. Set Indpnt and Depend to Auto unless your teacher tells you otherwise. Auto means the calculator fills in the table for you, which is what you want most of the time.
Ask mode: checking specific x values
Sometimes you do not want a whole table. You just want the value of the function at one or two specific x values, like x = 7.5 or x = -3. That is what Ask mode is for. Press [2ND] then [WINDOW], move to Indpnt, and select Ask instead of Auto. Now press [2ND] then [GRAPH] to open the table, and it will be empty. Type the x value you want, press [ENTER], and the calculator will fill in the y value for that x. Type another x value, press [ENTER], and it will add another row.
Ask mode is perfect for homework questions that ask for the value of a function at a particular x, because you get an exact answer without scrolling through a long table. Just remember to set Indpnt back to Auto when you are done, or the next table you open will be empty and you will wonder where the numbers went.
A worked example: using the table to solve a problem
Imagine a problem that asks you to find the value of y = 2x + 5 when x is 4, and to find the x value that gives y = 21. Type 2x + 5 into Y1 and open the table with [2ND] then [GRAPH]. Scroll down to x = 4 and you will see y = 13. That answers the first part. Now keep scrolling until you find y = 21, and you will see it is at x = 8. That answers the second part. The table lets you read the answer straight off, without any algebra at all.
The table is also useful for finding patterns. If you look at the y values for y = 2x + 5, they go up by 2 each time x goes up by 1. That tells you the slope is 2, which is a good way to check that you typed the function in correctly. If the y values jump around in a way you did not expect, go back to Y= and check your function.
Common mistakes
The most common mistake is having the table in Ask mode without realising it. If you open the table and it is empty, press [2ND] then [WINDOW] and check that Indpnt is set to Auto. The second most common mistake is forgetting to change TblStart and ΔTbl, and then scrolling through a long table to find the x value you want. Set the table up first, and you will save time. The third mistake is reading the wrong column when you have more than one function graphed. The table will have a column for each function, so make sure you are reading the column for the function you care about. The column headings at the top of the table tell you which is which.
Finally, remember that the table shows you values, not the graph. If you need to see the shape of a function, press [GRAPH]. The table and the graph are two views of the same function, and the best students use both, checking one against the other.
Try it yourself
Try these on your calculator. Graph y = x^2 + 1 and use the table to find y when x is 5, which should be 26. Set the table to start at x = -3 with a step of 0.5 and look at the values around the vertex. Switch to Ask mode and find the value of y = 3x – 2 when x is 10, which should be 28. If you can do all three, you know how to use the table, and you have a fast way to check values that will help you in every graphing lesson from now on.